Battery / Charging
7.4V 2S LiPo Battery Pack
Two LiPo cells in series: 7.4 V nominal and 8.4 V fully charged.
Generic
Overview
A two-cell series LiPo pack. Its output varies from roughly 6.0 V discharged to 8.4 V fully charged. Capacity, connector, protection board and maximum current depend on the exact pack and must be checked before driving motors.
Pins & wiring
7.4V 2S LiPo Battery Pack
Linear package
Physical pin order shown left to right.
All pins
Hover · click to selectSelected pin
POSITIVE
Also: +, BAT+, VOUT+
- Direction
- Output
Full pin table
| Pin | Name | Role | Direction |
|---|---|---|---|
| + | Power | Out | |
| - | Ground | Passive |
Specifications
Electrical
- Output Voltage
- 7.4 Vsrc
Footprint
No independently verified physical footprint is on file for this part yet.
Alternatives
No alternatives are on file yet for this part.
Documents
No documents or CAD assets are on file for this part yet.
Frequently asked questions
What voltage does the 7.4V 2S LiPo Battery Pack run at?
The 7.4V 2S LiPo Battery Pack runs at 7.4V, per the spec sheet below. Always double-check against the specific board you have — some breakouts add an onboard regulator that changes the usable input range.
How many pins does the 7.4V 2S LiPo Battery Pack have?
The 7.4V 2S LiPo Battery Pack has 2 pins. See the full pinout table in Pins & wiring for each pin's role.
Can I simulate the 7.4V 2S LiPo Battery Pack before ordering hardware?
Not yet — the 7.4V 2S LiPo Battery Pack does not have a live simulation model in Banana Board today, so validate the wiring here and test on real hardware.
Related references
Build it, do not just look it up
Describe your circuit in one sentence and Banana Board wires it to these exact pins, validates it, and lays out a fab-ready PCB.